At some level, most electrical devices will develop faults and breakdowns, and unfortunately, air conditioners are no different! Some air conditioning repairs, however, can be very straightforward. When they seem to be working okay, a normal fault that can affect many air conditioners, but they’re just no longer cooling us. If you find yourself in this situation, then the good news is that only cleaning is most likely needed. Cleaning the air conditioner yourself is very easy, but as with any electrical device, care must be taken. You’d be well advised to review the owner’s manual thoroughly before you start. Check AC repair near me.
Make sure the power is turned off before you begin any maintenance on your air conditioner! The shut off panels are usually placed on the air conditioner, but just shut off the power to your home if you have trouble locating it. You should also make sure there is no debris near the condenser.
Now you are able to see what the air conditioner dilemma is. Remove the grill cover off the condenser, firstly. Then clean the fins gently with either a brush or a rag. The fins can get damaged quickly, so you’ll have to be careful. Then it’s time to vacuum away any remaining dust after you’ve completed brushing them. You need to unscrew the cover now and carefully lift it off the grill. We have to hose the fins now that we’re finished with the cleaning; but with a waterproof covering you’ll need to secure the engine. This is also an acceptable time to see if greasing will be needed for the motor. Okay, well, you’ve done washing up the air conditioner. A fine work!
You should turn the air conditioner on when you have reassembled the device to see if your maintenance has helped. Let it run for a few minutes when you turn it on and then place your hands on the pipes that run to the condenser, so one pipe should feel hotter than the other. If the air conditioner is still not running, then there is a fair risk that the refrigerant needs to be recharged and a technician will have to be called in.